Accessories






























Accessories

 

Mixers Agitators Scales
Static mixers for plural part resins like: epoxy, urethane, silicone, urea-formaldehyde, acrylics and PVA  
Agitators to keep your: epoxy, urethane, silicone, urea-formaldehyde, acrylics or PVA mixed up and ready to dispense
Our flow through agitator solves the problem of additives settling out in gravity feed drum systems. Your material is agitated along a shaft by an air or electric motor as the drum lies horizontal. This allows for a gravity feed into your meter mix machine.
Ohaus scales for measuring your two or three part epoxy, urethane, silicone, urea-formaldehyde, acrylics or PVA.
Static Mixers: Both components in a two part system are dispensed in to the mixer. At each element the flow is divided and turned 90°. When the material reaches the end of the tube it is thoroughly mixed and ready to apply. Due to their low cost the mixers may be discarded after use, saving time and solvent costs.

Spraying
Many of our machines can be equipped with this spraying option. Our simple control system allows an operator to easily achieve a uniform spray pattern, and disposable static mixers allow a quick and simple clean up.
 
Do you wonder if your epoxy ratio is correct? The proper epoxy ratio is very important if you are to develop the designed strength and performance of your fiberglass layups. We have used OHAUS scales in our shop for more than 20 years and have found them to be the best product available for the money.
Laminating Roller
Efficiently Dispenses epoxy directly onto your large wet lay-ups.

Internal and external feed rollers available.

Internal and external feed rollers available.

Solvent purge system for fast easy clean up (mixers can be reused).
Rotary table for filter end cap Rotary Table

Considerably less expensive than XY system alternatives, our Rotary Table option offers the ability to dispense materials on circles from 24mm to 155mm in diameter.

 It is an excellent value for filter end cap gluing applications.

Quick disconnect allows for easy clean up between shifts Magnetic positioning system allows for easy change-over to new sized filter end cap

 Machine can be configured to meet your needs.

 

  

 

 

Return to Main Page

Rook Metering/Michael Engineering
5625 Venture Way
Mt. Pleasant, MI 48858
Phone: (989) 772-4073
Fax: (989) 772-3500

Or contact us through e-mail:
inquiry@rookmetering.com
inquiry@michaelengineering.com