Dispenser Comparison



sticky stuff manual dispenser for two-part resins

Sticky Stuff Dispenser
Model A


  • Up to 2 lbs (.9 kg) per minute
  • Adjustable ratios from 7:100 to 1:1
  • Hand operated
  • Handles materials up to 7000 cps, can go higher with heat
Eliminates mistakes and reduces waste, pump only what you need. Faster than calculating, weighing, and pouring. Cleaner and safer with less resin on hands, clothes, and tools.

sticky stuff manual dispenser for two=part resins

Sticky Stuff Dispenser
Model B


  • Up to 6 lbs (2.7 kg) per minute
  • Adjustable ratios from 7:100 to 1:1
  • Hand operated
  • Handles materials up to 7000 cps, can go higher with heat

The big brother to the model A with large pistons to increase output.

sticky stuff manual dispenser for two-part resins

Sticky Stuff Dispenser
Urethane Option


  • Desiccant tubes
  • Solvent cup
  • Mixer manifold

gear driven goo grinder meter mixer and dispenser for two=part resins

Goo Grinder


  • 4 lbs (1.8 kg) per minute
  • Ratios from 1:1 to 6:1
  • Manual, air or electric drive options
  • Viscosities from 200 to 50,000 cps
  • Excellent for unfilled resin.

The Goo Grinder bridges the gap between manual machines and bench top machines and can be equipped with powered drive options or manual drive options.

Filler Flash, manual metering machine for two=part resins

Filler Flash


  • 4 lbs (1.8 kg) per minute
  • Ratios from 6:1 to 1:1
  • Manually foot operated
  • Viscosities from 200 to 50,000 cps

  • High-volume, high-viscosity, manually-operated pump.

Pump-kin


  • 2 lbs (.9 kg) per minute
  • Ratios from 7:100 to 100:100
  • Pneumatic power and foot pedal operated for convenience
  • Viscosities from water thin to viscous flowable materials around 100,000 cps

benchtop metering and mixing machine for two-part resins

Super E


  • Up to 3 lbs (1.4 kg) per minute
  • Ratios from 6:100 to 100:100
  • Pneumatically powered
  • Operator or electronic shot size control.
  • Can pump any flowable material, roughly 1 cps to above 100,000 cps
  • Dimensions width: 24" (61 cm) depth: 15" (38 cm) in height: 29" (73 cm)
  • Excellent Abrasive Resistance

The Super E is a compact bench top machine. The simple operation means low maintenance cost, and the single acting abrasive resistant pump design is well proven by thousands of Super Es in the field.

pro meter, pneumatically operated metering pump for two-part resins

Pro Meter


  • Up to 8 lbs (3.6 kg) per minute
  • Ratios from 3:100 to 100:100
  • Pneumatically powered
  • Operator or electronic shot size control.
  • Viscosities from 1 cps to 100,000 cps
  • Dimensions -- width: 37" (94 cm) depth: 21" (35 cm) height: 26" (66 cm)

With larger pumps to increase output, the Pro Meter provides industrial strength and performance in a bench top machine. The Pro Meter is compact and has the same abrasion resistant qualities of the Super E.

fixed ratio metering and mixing pump for two-part resins

FR6


  • Up to 17 lbs (7.7 kg) per minute
  • Fixed ratio 1:1 or 2:1
  • Pneumatic power with button controls
  • Viscosities from 1cps to 100,000 cps
  • Can be used to spray-apply materials.
  • Great for on-site field applications

Rugged, dependable proven, Pro Meter style pumps with output of more then 1 GPM. Available with heaters, Electronic Shot Control, and many different reservoirs and output gun options.

dual flow, ideal for spraying applications

Dual Flow


  • 24 lbs (10.9 kg) per minute
  • Designed for 1:1 aplication
  • Pneumatic power with button thumb controls
  • Viscosities from 1 to 50,000 cps

Mainly used in spraying and the spraying of elastomeric coatings, and is fully capable of other 1:1 applications. Designed for mobility around the work site with a durable wheel base and up to 100 foot heated hoses.

heavy duty perfect flow metering and mixing pump

Perfect Flow


  • Up to 27 lbs (12.25 kg) per minute
  • Wide ratio ranges from 3.5:100 to 1:1
  • Pneumatic power with a variety control options
  • Viscosities from 1 to 50,000 cps
  • Acid catalyst capable.

Combining high flow rate with the ability to run multiple high volume shifts the Perfect Flow can handle demanding production runs. Often used in high volume urethane, epoxy, and wood glue applications, it's system is right for rail car volumes.
variable ratio, 5 gallon reservoir, metering and mixing pump

VR-5


  • 3 lbs (1.4 kg) per minute
  • Ratios from 20:1 to 1:1
  • Pneumatic power with a variety control options
  • Can handle flowables and paste

Able to pump both resin and hardener directly from the shipping container. The VR-5 eliminates the waste and mess of material transfers.
high viscosity metering and mixing pump for two-part resins

Ram Flow


  • Up to 8 lbs (3.6 kg) per minute
  • Ratios from 3.5:100 to 13.5:100
  • Pneumatic power with a variety control options
  • Can pump high viscosity materials and paste

The Ram Flow requires remarkably low maintenance and has proven extremely durable. A popular machine for making silicon molds. And can pump resin direct from 55 gallon drum.
heavy duty single component material dispenser

Gluey


  • Up to 16 lbs (7.3 kg) per minute
  • Single component materials up to 50,000 cps
  • Pneumatic power with a variety control options

Comes complete with: reservoir, wheeled cart, output hose, integral hose hanger for easy storage, and gun. Just add your material, and you are ready for production!

Single Post Ram heavy duty single component material dispenser

Single Post Ram


  • 4 lbs (1.8 kg) per minute
  • Pneumatically powered, with many control options
  • Pumps viscous, paste-like materials

Pumps directly from 5 gallon shipping containers to elimate messy material transfers. Durable parts with hardened parts have a long service life and will handle abrasive materials