When to Choose the Pro Meter: Ideal for a broad spectrum of applications, the Pro Meter shines in casting, potting, laminating, coil impregnation, filter end capping, vacuum casting, and potting scenarios. It’s the perfect fit for large parts or situations requiring high flow rates, offering unparalleled versatility with an output of 1 gallon per minute for low viscosity materials. Notably efficient with abrasive fillers and less-than-clean materials, the Pro Meter tackles challenging ratios and complex material mixes with ease, making it a preferred choice for a wide range of industrial dispensing needs.

Specifications:

• Type: Compact, industrial-grade dispensing machine, available in pneumatically operated configurations.
• Dispensing Capability: Adjustable gentle flow up to 1 gallon of mixed material per minute.
• Ratio Adjustment: Sliding ratio adjustment block allows for precise control, offering ratios from 2:100 to 100:100.
• Material Compatibility: Capable of handling materials with viscosities from 1cps to over 200,000cps+, provided they are self-leveling.
• Standard Features: Delivery through either 8 or 13-gallon day tanks, with options for 55-gallon drums, totes, or vacuum degassing tanks for material delivery.
• Pumps: Precise piston pumps designed for both high and low viscosity materials, featuring solvent cups on pumps to enhance seal life and minimize downtime.

Configurations:

• Vertical Machine: Best for moisture-sensitive materials like urethane, methyl acrylates, and some high-performance epoxies. Includes wet cups and desiccant filters to protect against moisture.
• Horizontal Machine: Suited for epoxies and silicones that are not moisture sensitive.

Available Options:

• Snuff Back Gun: Enables instant material flow stoppage for seamless transitions.
• Electronic Shot Size Control: Features encoder-based control with memory, Auto Repeat, and Purge Timer functions.
• Heaters: Ensure optimal viscosity by heating reservoirs, pumps, and hoses.
• Agitators: Available in both pneumatic and electric variants to maintain material consistency.
• Support Equipment: Includes carts, drum racks, tote stands, vacuum degassing tanks, and supply pumps.
• Level Sensors and Controls: Monitor and manage material supply efficiently.

Versatile and Robust: The Pro Meter’s comprehensive design and broad range of capabilities make it an essential tool for industries requiring precise, reliable, and efficient dispensing solutions. Whether dealing with intricate electronic components or large-scale industrial projects, the Pro Meter delivers with accuracy and adaptability.

The post Pro Meter appeared first on Michael Engineering.

The Pump-kin is a small light duty machine. It is at its best when running short run production/lab batch parts larger than 5cc but not so large that the manual controls make the operation tedious.

The low cost and small foot print of the Pump-kin make it the best fit for many light industrial applications.

The Pump-kin is the smallest of our air powered machines. Intended for lab or short run production work It will pump most self-leveling resins. The output is 14cc per stroke, approximately one pound per minute. One full or partial stroke with each press of the foot pedal. Ratios from 7/100 to 1/1 are available. The output speed is adjustable with the supplied air pressure regulator.

As with all of our machines with single acting pumps the Pump-kin is available in two configurations:

The vertical machine for moisture sensitive urethane and methacrylate materials. The vertical configuration includes wet cups around the piston rods to keep material from sticking to the piston rods and damaging the seals, and desiccant filters to remove any moisture from the air that is vented into the reservoirs.

The Horizontal machine for epoxy and silicone, materials that are not moisture sensitive.

In addition to the base models there are several options available:

6’ hoses, mechanical stroke length limit, vacuum degassing tanks, reservoir and pump heaters.

The post Pump-kin appeared first on Michael Engineering.

The Super E is the best choice for most potting, filter, and casting applications. The exceptions are when the parts are large and the required flow rate exceeds 3lb/minute (low viscosity). The Super E is a straightforward, simple winner in the overly complex world of industrial meter mix equipment.

Specifications

• Type: Compact, pneumatically operated bench top meter mix dispense system.
• Dispensing Capability: Up to 3 lbs. of mixed resin per minute (low viscosity).
• Pumps: Durable, accurate piston pumps with abrasion resistance, hardened parts, and wear take-up seals.
• Material Compatibility: Suitable for all self-leveling materials.
• Standard Features: Includes nine-foot hoses, a mixer gun with disposable static mixers, spare parts, an extra instruction manual, and accessible technical support.
• Ratio Ranges: Comes preset within one of four ratio ranges, fully adjustable within that range, covering ratios from 6:100 to 1:1.
• Versatile Ratio Adjustment System: Enables simple and accurate ratio adjustments for diverse application requirements.

Configurations

• Vertical machine: for moisture sensitive urethane and methacrylate materials. The vertical configuration includes wet cups around the piston rods to keep material from sticking to the piston rods and damaging the seals, and desiccant filters to remove any moisture from the air that is vented into the reservoirs.
• Horizontal machine: for epoxy and silicone materials that are not moisture sensitive.

Available Options

• Snuff Back Gun: Instantly stops the flow of resin for a quick, clean transitions to the next part.
• Electronic Shot Size Control: Encoder-based control with memory locations, Auto Repeat, and Purge Timer functions.
• Heaters: Available for reservoirs, pumps, and hoses to maintain optimal material viscosity.
• Agitators: Both pneumatic and electric options to maintain material consistency.
• Support Equipment: Includes carts, drum racks, tote stands, vacuum degassing tanks, and supply pumps.
• Level Sensors and Controls: For monitoring and managing the material supply.

The post Super E appeared first on Michael Engineering.